[Free] 2019(Nov) EnsurePass Microsoft AZ-300 Dumps with VCE and PDF 91-100

Get Full Version of the Exam
http://www.EnsurePass.com/AZ-300.html

Question No.91

DRAG DROP

You are developing a rating service for books that runs on Azure Service Fabric. One of the services uses reliable collections that update the ratings of a book.

Testers report that the ratings are not updated when the code is run.

You need to implement the code to ensure that ratings are updated in the collection. You have the following class:

image

How should you complete the code? To answer, drag the appropriate code segments to the correct locations. Each code segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

NOTE: Each correct selection is worth one point

image

Correct Answer:

image

Question No.92

Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.

image

image

When you are finished performing all the tasks, click the `Next#39; button.

Note that you cannot return to the lab once you click the `Next#39; button. Scoring occur in the background while you complete the rest of the exam.

Overview

The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment,

some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn#39;t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.

Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.

Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.

To start the lab

You may start the lab by clicking the Next button.

Your on-premises network uses an IP address range of 131.107.2.0 to 131.107.2.255.

You need to ensure that only devices from the on-premises network can connect to the rg1lod7523691n1 storage account.

What should you do from the Azure portal?

Correct Answer: See solution below.

Explanation:

Step 1: Navigate to the rg1lod7523691n1 storage account.

Step 2: Click on the settings menu called Firewalls and virtual networks.

Step 3: Ensure that you have elected to allow access from #39;Selected networks#39;.

Step 4: To grant access to an internet IP range, enter the address range of 131.107.2.0 to 131.107.2.255 (in CIDR format) under Firewall, Address Ranges.

References:

https://docs.microsoft.com/en-us/azure/storage/common/storage-network-security

Question No.93

You have an Azure Service Bus.

You need to implement a Service Bus queue that guarantees first-in-first-out (FIFO) delivery of messages.

What should you do?

  1. Enable partitioning

  2. Enable duplicate detection

  3. Set the Lock Duration setting to 10 seconds

  4. Enable sessions

  5. Set the Max Size setting of the queue to 5 GB

Correct Answer: D

Explanation:

https://docs.microsoft.com/en-us/azure/service-bus-messaging/service-bus-azure-and-service-

bus-queuescompared-contrasted

Question No.94

You have a virtual network named VNet1 as shown in the exhibit. (Click the Exhibit tab,)

image

No devices are connected to VNet1,

You plan to peer VNet1 to another virtual network named VNet2 in the same region. VNet2 has an address space of 10.2,0.0/16.

You need to create the peering. What should you do first?

  1. Create a subnet on VNet1 and VNet2.

  2. Add a gateway subnet to VNet1.

  3. Configure a service endpoint on VNet2

  4. Modify the address space of VNet1.

Correct Answer: A

Question No.95

HOTSPOT

You plan to deploy 20 Azure virtual machines by using an Azure Resource Manager template. The virtual machines will run the latest version of Windows Server 2016 Datacenter by using an Azure Marketplace image.

You need to complete the storageProfile section of the template.

How should you complete the storageProfile section? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

image

Correct Answer:

image

Question No.96

You have an Azure subscription that contains three virtual networks named VNet1, VNet2, and VNet3. VNet2 contains a virtual appliance named VM2 that operates as a router.

You are configuring the virtual networks in a hub and spoke topology that uses VNet2 as the hub network.

You plan to configure peering between VNet1 and VNet2 and between VNet2 and VNet3. You need to provide connectivity between VNet1 and VNet3 through VNet2.

Which two configurations should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

  1. On the peering connections, allow forwarded traffic

  2. Create a route filter

  3. On the peering connections, allow gateway transit

  4. Create route tables and assign the table to subnets

  5. On the peering, use remote gateways

Correct Answer: CE

Explanation:

Allow gateway transit: Check this box if you have a virtual network gateway attached to this virtual network and want to allow traffic from the peered virtual network to flow through the gateway.

The peered virtual network must have the Use remote gateways checkbox checked when setting up the peering from the other virtual network to this virtual network.

References:

https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage- peering#requirements-and-constraints

Question No.97

Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company backs up data to on-premises servers at their main facility. The company currently has 30 TB of archived data that infrequently used. The facility has download speeds of 100 Mbps and upload speeds of 20 Mbps.

You need to securely transfer all backups to Azure Blob Storage for long-term archival. All backup data must be sent within seven days.

Solution: Backup data to local disks and use the Azure Import/Export service to send backups to Azure Blob Storage.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: A

Question No.98

Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1. Adatum contains a group named Developers. Subscription1 contains a resource group named Dev.

You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.

Solution: On Dev, you assign the Contributor role to the Developers group. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: A

Explanation:

The Contributor role lets you manage everything except access to resources. It allows you to create and manage resources of all types, including creating Azure logic apps.

References:

https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles#contributor

Question No.99

HOTSPOT

You have an Azure subscription that contains the resources shown in the following table.

image

You need to deploy a load-balancing solution for two Azure web apps named App1 and App2 to meet the following requirements:

image

image

App1 must support command injection protection. App2 must be able to use a static public IP address.

image

App1 must have a Service Level Agreement (SLA) of 99.99 percent.

Which resource should you use as the load-balancing solution for each app? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

image

Correct Answer:

image

Question No.100

You have an Azure subscription named Subscription1.

You have 5 TB of data that you need to transfer to Subscription1. You plan to use an Azure Import/Export job.

What can you use as the destination of the imported data?

  1. an Azure Cosmos DB database

  2. Azure SQL Database

  3. Azure File Storage

  4. Azure Data Lake Store

Correct Answer: C

Explanation:

https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-service

Get Full Version of the Exam
AZ-300 Dumps
AZ-300 VCE and PDF

Leave a Reply

Your email address will not be published. Required fields are marked *